| The "SOLVENTCLEAN SYSTEM" is a VOC abatement
system in which the SOLVENTCLEAN concentrator is combined with VOC abatement unit. This
ensures higher-level space/energy savings than systems not using a concentrator. Features
By combining the SOLVENTCLEAN concentrator with the VOC abatement unit, the overall
system can be made more compact and energy savings can be realized.
Cost of supplementary fuels can be greatly reduced, particularly when combined with
oxidizer.
The air conditioning load can be reduced by cleaning factory exhaust air with the
concentrator and then recycling it.
Concentrator + Recovery unit
Recovery unit by adsorption or by cooling is used as VOC abatement unit. Generally, a
concentrator is used in pre-processing and the recovery unit is combined in
post-processing. In other systems, a concentrator is incorporated into a backup system for
for exhaust of recovery unit, making it possible to reach low exhaust concentration levels
equivalent to those of oxdizer. This system can be used for newly installed or existing
unit.
*
Since flame is not used, a high safety level is maintained. Even in systems where halogen,
etc, are involved, there is no danger of secondary pollution. This system can be used to
recover single ingredient VOCs and reuse them.
Sanden, France
Concentrator + Oxidizer
Catalytic oxdizer or Thermal oxdizer is used as VOC abatement unit. When a concentrator
and catalytic oxdizer are combined, depending on the conditions use of supplementary fuel
can be practically unnecessary.
* VOCs are subject to oxidation and disintegration, so the
VOC discharge volume is low, and this system can be applied to a wide range of VOCs.

We will prepare an
estimate if required.
Please email requirements to us. |
|